La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel H3C GB0-280 peut vous assurer à réussir 100% le test H3C GB0-280. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test H3C GB0-280 à la première fois.
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test H3C GB0-280. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Dans cette Industrie IT intense, le succès de test H3C GB0-280 peut augmenter le salaire. Les gens d'obtenir le Certificat H3C GB0-280 peuvent gagner beaucoup plus que les gens sans Certificat H3C GB0-280. Le problème est comment on peut réussir le test plus facile?
Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test H3C GB0-280 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test H3C GB0-280, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.
Code d'Examen: GB0-280
Nom d'Examen: H3C (Constructing Enterprise-level Routing Networks)
Questions et réponses: 400 Q&As
GB0-280 Démo gratuit à télécharger: http://www.pass4test.fr/GB0-280.html
NO.1 Between IBGP peers is not always physically direct-connected; while between the EBGP peers
there must be a physically connected link. ( )
A. True
B. False
Answer: B
H3C GB0-280 GB0-280 examen GB0-280
Topic 6, E
E
NO.2 Which of the following are right about BGP route dampening? ( )
A. BGP route dampening is caused by the un-stability of the route.
B. The penalty of route flapping becomes heavier with time going.
C. The route under penalty will not be notified until it disappears from the routing table.
D. When there is route flapping, the Update packet will be advertised repeatedly in the network.
Answer: A,D
H3C GB0-280 certification GB0-280
Topic 3, F
F
NO.3 For a router running the OSPF protocol, Router ID is the unique identifier of a router.
According to
the protocol, the Router ID must be unique in the following scope ( )
A. In the network segment
B. In the area
C. In the AS internal
D. In the whole Internet
Answer: C
H3C certification GB0-280 GB0-280 GB0-280 examen certification GB0-280
Topic 4, B
B
NO.4 Which of the following are the wrong description to the BGP route attributes? ( )
A. The router should propagate the attribute to other peers when it receives a transitional attribute,
such as metric.
B. Mandatory attributes refer to the essential attribute of each route, such as the next hop; while
the optional can be omitted.
C. Local-preference is for the route to reach the destination with priority in the AS internal.
D. Community identifies a group of routers with the same attributes. It has something to do with
the AS, but nothing with the IP subnet.
Answer: A,D
H3C examen GB0-280 examen GB0-280 certification GB0-280
Topic 7, G
G
NO.5 According to the OSPF protocol, for a intra-area router operating in the Stub area, which kind
of
LSA is impossible to appear in its LSDB? ( )
A. Router LSA (Type = 1);
B. Network LSA (Type = 2);
C. Network Summary LSA (Type = 3);
D. ASBR Summary LSA (Type = 4);
E. AS External LSA (Type = 5);
Answer: E
H3C GB0-280 GB0-280 GB0-280 examen
Topic 1, D
D
NO.6 Which of the following are right about the ACL rule in the IPSEC? ( )
A. permit means to enable IPSEC on the defined data flow
B. deny means to transparently transmit and disable the IPSEC on the defined data flow
C. Data flow without definition will be discarded
D. Data flow without definition will be transparently transmitted
Answer: A,B,D
certification H3C certification GB0-280 GB0-280
NO.7 Topic 1, D
D
1. To check the IP address of the DR and BDR in the OSPF area, you can use ( )
A. display ospf routing
B. display ospf error
C. display ospf interface
D. display ospf peer
Answer: C,D
H3C GB0-280 GB0-280 examen GB0-280
Topic 2, A
A
NO.8 OSPF categorizes the AS external route into 2 parts: Type 1 and Type 2. Which of the following
are Type 1 AS external routes? ( )
A. Imported static routes.
B. Imported RIP routes.
C. Imported routes from other ASs.
D. Imported BGP routes.
Answer: A,B,C
H3C GB0-280 examen certification GB0-280 GB0-280 GB0-280
Topic 4, B
B
NO.9 What are the preparations before you make IKE configuration? ( )
A. Decide the authentication algorithm during the IKE exchange.
B. Decide the encryption algorithm during the IKE exchange.
C. Decide the DH algorithm during the IKE exchange.
D. Decide the identity authentication mechanism for the exchange parties.
Answer: A,B,C,D
H3C GB0-280 examen GB0-280 GB0-280 GB0-280
Topic 5, C
C
NO.10 Which of the following are right about BGP confederation? ( )
A. It partitions an AS into several sub-ASs. The IBGP peer in the sub-AS fully connects to each
other, and meanwhile connects to other sub-ASs.
B. The confederation can easily detect the route loop in the AS.
C. EBGP is adopted between the sub-ASs, the confederation itself and the AS external.
D. Such important information as the next hop, MED and Local-Preference will not lose when
traversing the sub-AS.
Answer: A,B,C,D
H3C examen GB0-280 certification GB0-280 GB0-280
Topic 6, E
E
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
没有评论:
发表评论