Guide de formation plus récente de Symantec ASC-093

Le test Symantec ASC-093 est l'un très improtant dans tous les tests de Certification Symantec, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Symantec ASC-093 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Symantec ASC-093 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Symantec ASC-093. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de ASC-093, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Bien qu'il ne soit pas facile à réussir le test Symantec ASC-093, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Symantec ASC-093, mais encore à vous aider d'économiser votre temps.

Code d'Examen: ASC-093
Nom d'Examen: Symantec (ASC Data Loss Prevention 2010)
Questions et réponses: 70 Q&As

ASC-093 Démo gratuit à télécharger: http://www.pass4test.fr/ASC-093.html

NO.1 Data Loss Prevention (DLP) can use custom SSL certificates to secure communication between the
Endpoint server and Endpoint agents. What is the name of the tool that is used to create these
certificates?
A. endpointssl.exe
B. endpointkeytool.exe
C. sslkeytool.exe
D. endpointsslkey.exe
Answer: B

certification Symantec   ASC-093   ASC-093

NO.2 Symantec Data Loss Prevention can be configured to populate custom attributes pulled from a
Lightweight Directory Access Protocol (LDAP) server. In addition to LiveLdapLookup.properties, which
other file must be modified to configure custom attributes.?
A. Plugins.properties
B. Manager.properties
C. Jdbc.properties
D. Aggregator.properties
Answer: A

Symantec examen   ASC-093   ASC-093 examen   ASC-093   ASC-093 examen

NO.3 A user has determined that many incidents are showing 100 matches per incident from the default PCI
policy template. The user needs to increase this limit to better reflect the most critical files with the most
violations. Which change will increase the number of maximum matches per incident?
A. change the value for DI.MaxViolations
B. change the value for IncidentDetection.patternConditionMaxViolations
C. change the value for EDM.MaximumNumberOfMatchesToReturn
D. change the value for Incident Threshold within the relevant policy
Answer: A

Symantec   ASC-093   ASC-093 examen   ASC-093   ASC-093

NO.4 Endpoint agents CANNOT monitor data copies to what?
A. CD/DVD
B. network shares
C. USB (for example, thumb drives)
D. printers/faxes
Answer: B

Symantec examen   ASC-093   ASC-093

NO.5 What needs to be done with unused Network Interface Cards (NIC) on the Enforce server?
A. They need to be configured to utilize Dynamic Host Configuration Protocol (DHCP).
B. They need to be disabled.
C. They need to be configured with a static IP address.
D. They need to be assigned with 127.0.0.1 as their IP address.
Answer: B

Symantec   ASC-093   certification ASC-093   certification ASC-093

NO.6 Data Loss Prevention (DLP) Network Prevent supports load balancing among multiple Prevent servers
in high volume networks. In the absence of a network load balancing device, what is the best practice for
enabling load balance among multiple Prevent servers?
A. enable Load Balancing in the Settings, Servers Overview page
B. In the case of Network Prevent for Email, the upstream MTA is configured with the IP address of each
Prevent server. This is done in a similar fashion for the web proxy server(s) with the IP address of each
Network Prevent for web server.
C. A third Network Interface Card (NIC) is required for each Prevent server to be used as a "heartbeat
monitor" to the other Prevent servers. Once installed and configured, the Prevent servers act as a virtual
cluster.
D. configure a DNS alias to point to the IP address of each Prevent server, also known as a DNS Round
Robin
Answer: D

certification Symantec   ASC-093 examen   ASC-093 examen   ASC-093

NO.7 What is the best method for deploying a policy to Endpoint agents that makes use of Index Matching.
A. create the policy using Described Content, then "and" the Index Matching statement into the policy
B. Policies that use Index Matching cannot be deployed to Endpoint agents.
C. create the policy using the Index Matching statement, then "and" a Described Content statement into
the policy
D. combine all Index Matching statements that are to be deployed to Endpoint agents into one single
policy
Answer: A

Symantec examen   ASC-093   ASC-093 examen   ASC-093

NO.8 When implementing an automated response rule, what must be done to make the rule execute?
A. select Incident All and click the Response Rule button to execute
B. enable response rules from the Settings page
C. add the response rule to the appropriate policy
D. Automated response rules are effective as soon as they are created
Answer: C

certification Symantec   ASC-093   certification ASC-093   certification ASC-093

NO.9 What is a best practice to be used for monitoring mail traffic in an environment that uses Transport
Layer Security (TLS) for their outbound email?
A. deploy Network Prevent for Email
B. turn TLS off on the outbound email server
C. import the TLS certificate from the outbound email server onto the Network Monitor detection server
D. Data Loss Prevention is not capable of viewing TLS traffic.
Answer: A

Symantec   ASC-093 examen   ASC-093

NO.10 If an Enforce server is configured to use Active Directory (AD) authentication for logins, which statement
is true?
A. Any user that has an account in AD can log in to Enforce as long as they have been assigned a role.
B. Any user that has an account in AD can log in to Enforce as long as they have been added to the
krb5.ini or krb5.conf file.
C. Any user that has an account in AD can log in to Enforce as long as their Organizational Unit has been
assigned to a Policy Group.
D. Any user that has an account in AD can log in to Enforce as long as they have a matching user name in
Enforce.
Answer: D

Symantec   ASC-093   ASC-093 examen   ASC-093   ASC-093 examen

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.