Pour réussir le test HP HP2-B110 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test HP HP2-B110. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test HP HP2-B110 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification HP HP0-Y45. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test HP HP0-Y45. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test HP HP0-Y45 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Code d'Examen: HP2-B110
Nom d'Examen: HP (Selling HP Imaging and Printing Supplies)
Questions et réponses: 69 Q&As
Code d'Examen: HP0-Y45
Nom d'Examen: HP (Architecting HP Network Solutions)
Questions et réponses: 60 Q&As
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Si vous faites toujours la lutte contre le test HP HP2-B110, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de HP HP2-B110. Si vous avez déjà décidé à s'améliorer via HP HP2-B110, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
HP0-Y45 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y45.html
NO.1 A network architect is planning a complete access layer and core upgrade for a customer's
campus LAN. The campus has four large buildings, each requiring between 1000 and 3000 edge
ports. Which factor will play a primary role in determining whether the network architect needs to
plan a two-tier or three-tier topology for the campus LAN?
A. Whether the customer can afford the core switches that support intelligent Resilient Framework
(IRF).
B. The number of fiber links between each building and the building where the core switches reside.
C. Whether the customer requires a wireless solution.
D. The high number of edge ports that the solution requires.
Answer: B
HP examen HP0-Y45 examen HP0-Y45 examen
NO.2 Which customer requirement is mostly likely to cause the network architect to search for an
HP alliance solution?
A. An infrastructure Detection System/Infrastructure Prevention System (IDS/IPS) for virtualized
environment.
B. Load balancing appliances for a data center solution
C. Network management solution for a multi-vendor environment
D. High-capacity, Border Gateway Protocol (BGP)-capable router
Answer: A
HP examen certification HP0-Y45 HP0-Y45 examen HP0-Y45 examen HP0-Y45 examen certification HP0-Y45
NO.3 A physical server connects to two Fibre Channel (FC) switches.
The server supports eight virtual machines (VMs) with VMware version 5.1.
The VMs need to be zoned and given access to remote storage on an individual basis.
Which feature must the network architect ask the SAN administrators to enable FC ports?
A. N-port ID Virtualization (NPIV)
B. Virtual Fabrics or Virtual SANs (VSANs)
C. Credit-based flow control
D. World Wide Name (WWN) virtualization
Answer: A
HP examen certification HP0-Y45 HP0-Y45 examen certification HP0-Y45 HP0-Y45 examen
NO.4 A customer has a solution that continuously backs up date for critical services to a disaster
recovery site. The customer requires a one hour recovery point objective (RPO) and a 90 minute
recovery time objective (RTO). The network architect is scoping the bandwidth requirements and
has used perfmon to analyze the write throughput for the critical service over a month. The results
are:
-Peak throughput= 2000 Mbps -Average throughput = 500 Mbps -Highest average throughput in
hour increments =1000 Mbps -High average throughputin 90 minuteincrements =750 Mbps
What is the bandwidth requirement for the continuous backup?
A. 500 Mbps
B. 750 Mbps
C. 1000 Mbps
D. 2000 Mbps
Answer: B
certification HP HP0-Y45 examen certification HP0-Y45
5. A network architect is planning a solution for a customer who has voice over IP (VoIP) phones
with Ethernet connections and also voice over WLAN (VoWLAN) phones that use 802.1g
connections:
-The VoIPphones and VoIPserver use standard 802.1pvalue 5 and DillServ Code Point(DSCP)46 to
mark voicetraffic. -The VoWLAN phones use WiFi Multimedia(WMM)to send their traffic at high
priority.
What should the network architect do to ensure that voice traffic on its way to a VoWAN phone is
given the correct priority?
A. Make sure that the APs support 802.1n even if they also support backward compatibility with
802.11b/g.
B. Make sure that the VoWLAN phones support 802.1X and VLAN tagging.
C. Make sure that the switches convert the 802.1p values to VMM values.
D. Make sure that the MSM Controller has a DSCP map assigns DSCP 46 to the highest WMM
category.
Answer: D
HP examen certification HP0-Y45 HP0-Y45 certification HP0-Y45 certification HP0-Y45
6. A customer is seeking an upgrade for their campus LAN network. Currently the customer has
access layer switches that support 48 10/100/1000 Mbps ports and one Gigabit uplink. The
customer wants performance in the upgrade but also wants to minimize costs.
The network architect has used the network Traffic Analyzer (NTA) for intelligent Management
Center (IMC) to collect information about the access layer uplinks. These are the results:
-For switches on Floor1,the peak utilization in 650 Mbps on a Gigabit uplink.On most days, the
utilization peaksat about 400 Mbps. Peaks usuallyoccur briefly. -Forswitches on Floor 2, thepeak
utilizationis 800 Mbpson a Gigabit uplink. During active period, the utilizationoften remains near
800.
Which is the most appropriate plan for oversubscription in the new access layer? (For this question,
think only about oversubscription and not customer needs for redundancy)
A. 48.1 in all locations
B. 48.1 on floor 1 and 24.1 on floor 2
C. 24.1 on floor 1 and 4.1 on floor 2
D. 24.1 in all locations
Answer: A
HP certification HP0-Y45 certification HP0-Y45 HP0-Y45 examen HP0-Y45 examen
7. A customer needs a storage solution that uses the current IP network and delivers data to
serves in the manner of a file server. Which family of solution meets this need?
A. HP P6000 Enterprise Virtual Array (EVA) disk arrays.
B. HP Virtual Library Systems (VLS)
C. HP IBRIX X9000 Network Attached Storage (NAS)
D. HP 3PAR 10000 storage arrays
Answer: A
HP examen certification HP0-Y45 certification HP0-Y45 HP0-Y45 examen HP0-Y45 examen
8. HOTSPOT
A network architect designing HP addresses for a customer. The network architect is planning a core
routing solution and these VLANs:
-Management (network infrastructure) -Guest -Employees_Wired_Floor1
-Consultants_Wired_Floor1 -Voice_Floor1 -Consultants_Wireless -Employees_Wireless
The customer requires access control lists (ACLs) that control users according to their identity, guest,
employee, or contractor. As far as access control is connected, the customer does not care about
whether a user has wireless or wired access.
Which scheme enabled ACLs to use the forest rules to control users according to the customer
requirements? (Drag and Drop the marker on the scheme)
Answer:
没有评论:
发表评论