Le plus récent matériel de formation Microsoft MB4-198

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft MB4-198 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft MB4-198 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft MB4-198 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Microsoft MB4-198 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Microsoft MB4-198 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

On doit faire un bon choix pour passer le test Microsoft MB4-198. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft MB4-198 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Code d'Examen: MB4-198
Nom d'Examen: Microsoft (Retail Management system)
Questions et réponses: 152 Q&As

Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft MB4-198 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft MB4-198 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft MB4-198.

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Microsoft MB4-198 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Microsoft MB4-198. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Vous n'avez besoin que de faire les exercices à propos du test Microsoft MB4-198 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

MB4-198 Démo gratuit à télécharger: http://www.pass4test.fr/MB4-198.html

NO.1 What is the default Headquarters Manager username and password?
A.User: sa / Password: password
B.User: admin / Password: [blank]
C.User: sa / Password: [blank]
D.User: administrator / Password: password
Correct:D

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.2 What information is required when configuring Headquarters Client?
A.The name of the Store Operations database at the local store
B.The name of the Headquarters database at the head office
C.The network address of the machine that is running Headquarters Server
D.The system administrator user and password for the SQL server where the HQ database is installed at
the Headquarters location
Correct:A C

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.3 When importing into the Headquarters database from a Store Operations database using HQ
Administrator, what data is included in the import?
A.Purchase Orders
B.Item Taxes
C.Sales History
D.Categories
Correct:B D

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.4 Your enterprise allows customers to charge on account and pay towards the balance at any
store in the enterprise. What should you configure so that a cashier may retrieve account balance
and history information from all stores for a customer?
A.Mark the "Allow global customer payments" option in Headquarters Administrator Configuration.
B.Mark the "Connect to HQ to get customer's open ARs" option in Store Operations Manager
Configuration at each store.
C.On each register in the store, define the address and port of the Headquarters Client machine in Store
Operations Administrator Configuration window.
D.Mark the "New customers default as global customers" option in Store Operations Configuration at
each store.
Correct:B C

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.5 Which application should you install at each retail store in your enterprise environment that is
responsible for initiating the scheduled and/or manual connections to the head office location?
A.Headquarters Administrator
B.Headquarters Client
C.Headquarters Server
D.Headquarters Manager
Correct:B

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.6 Which operation should be performed in Headquarters Administrator if you feel the tables and
indexes are unsynchronized resulting in slow database performance?
A.Reindex
B.Change Collation
C.Upgrade
D.Check
Correct:A

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.7 You have created a Microsoft Excel spreadsheet which you would like to launch from within
Headquarters Manager. How can you configure this?
A.Copy the Excel file to a directory where you will store all add-ins. Edit the add-ins path in the RMSHQ.ini
file.
B.Copy the necessary Excel file to a directory where you will store all add-ins. In Headquarters
Administrator, configure the path to the folder in the Headquarters Configuration window.
C.All third-party files and add-ins must be located in the folder where the Headquarters application files
were installed; no configuration is necessary.
D.None of the above; Headquarters Manager does not have the ability to launch other application's files.
Correct:B

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.8 Which of the following wizards creates a new Store Operations database and copies centrally
maintained data from Headquarters into it?
A.New Store Wizard
B.Export Database Wizard
C.New Item Wizard
D.Inventory Wizard
Correct:B

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.9 Which of the following allows the user to make changes directly to the Headquarters database?
A.Maintenance Mode
B.Security Level 0
C.Administrator Login
D.None of the above
Correct:A

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.10 Which file should be used to create the sample Headquarters database?
A.rmshqdb.bck
B.rmshqsample.bck
C.rmsstore1.bck
D.rmshqexample.bck
Correct:B

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.11 Consider the following scenario: You have three stores and a head office. At the head office,
you have two machines; one machine is the database server and is named HQDATA. The other
machine is the communications server, where Headquarters Server is installed and is named
HQSERVER. At one of the stores in the enterprise, you have three machines; one machine is the
database server and is named SODATA. Another machine acts as a register as well as the
Headquarters Client machine; its name is SOREG1. The last machine acts as a register only; it's
name is SOREG2. You wish to allow each of your stores to perform store quantity checks (check
the quantity available of an item at another store). What should you enter as the Address in the HQ
Client tab in Store Operations Administrator if you are configuring the SOREG2 machine?
A.HQSERVER
B.HQDATA
C.SODATA
D.SOREG1
Correct:D

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.12 You are implementing a new Headquarters enterprise. You have several existing Store
Operations databases. One of these databases will be used as the source database when building
the Headquarters database using the Import Store Operations Data feature in Headquarters
Administrator. If you'd like to ensure the source database has records from each Store Operations
database, what type of data from the other stores should you manually enter (or import)?
A.Dynamic Data
B.Store Specific Data
C.Locally Originated Data
D.Centrally Maintained Data
Correct:D

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.13 You have multiple stores using Store Operations. You have recently purchased Headquarters to
consolidate your enterprise data. Which method should you perform to create the Headquarters
database which will contains the stores' items and suppliers?
A.Create a blank Headquarters database using the RMShqdb.bck file; then manually create records for
each item and supplier using Headquarters Manager.
B.Import the records from one of the store's Store Operations databases into the head office database.
Then, in Headquarters Manager, manually create records for each of the other store's items and suppliers.
C.Import the records from one of the store's Store Operations databases into the head office database.
Then, in Headquarters Administrator, use the Import Store Operations command for each of the other
store's databases.
D.Create a 'master' store database by importing each of the store's records into one Store Operations
database. Then, in Headquarters Administrator, import the master store database using the Import Store
Operations command.
Correct:D

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.14 You currently have one store running Store Operations and are implementing Headquarters. You
plan to have Global Customers within the Headquarters enterprise. What should you do to mark
the existing customers as global in the existing Store Operations database?
A.At the store, mark the "Enable global customers for multi-store" Configuration option
B.At the store, mark the "New customers default as global customers" Configuration option
C.Set up the Global Customer Account Options in Headquarters Manager
D.Run a Transact-SQL (T-SQL) statement to update the customers' "Customer is a global/enterprise
customer" option
Correct:D

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.15 Which file should be used to create an empty Retail Management System Headquarters
database?
A.rmshqdb.bck
B.rmshqsample.bck
C.rmsstore1.bck
D.rmshqexample.bck
Correct:A

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.16 When using global customers, which type of information is NOT available at all of the stores in
the enterprise?
A.The customer's entire purchase history
B.The customer's account balance
C.The customer's account type
D.The customer's credit limit
Correct:A

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.17 Which Headquarters application should you install and configure at the head office that listens
for incoming connections and acts as a gateway for exchanging data between the stores and the
head office?
A.Headquarters Administrator
B.Headquarters Client
C.Headquarters Server
D.Headquarters Manager
Correct:C

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.18 The Store ID that is uniquely assigned to each store in HQ Manager must be assigned in what
Store Operations window at the respective store?
A.File | Configuration of Administrator on each machine
B.File | Configuration of the HQ Client
C.File | Configuration of Manager
D.It does not need to be assigned anywhere at the store
Correct:C

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.19 The Headquarters Client application communicates with what other RMS Components?
A.The HQ Server and the store's Store Operations Manager
B.Headquarters Manager and the store's Store Operations Manager
C.Headquarters Manager and the store's SQL Server
D.The HQ Server and the store's SQL Server Database
Correct:D

certification Microsoft   MB4-198 examen   MB4-198 examen

NO.20 Headquarters licenses are sold by which entity?
A.Register
B.User
C.Store
D.Server
Correct:C

certification Microsoft   MB4-198 examen   MB4-198 examen

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Microsoft MB4-198. Ce ne sera pas un problème à réussir le test Microsoft MB4-198 si vous préparez le test avec notre guide d'étude.

MB4-198 MB7-517 70-563 MB7-515 70-622 dernières questions d'examen certification Microsoft et réponses publiés

Est-ce que vous vous souciez encore pour passer le test Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Vous Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622 pouvez télécharger le démo Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Code d'Examen: MB4-198

Nom d'Examen: Microsoft (Retail Management system)

Questions et réponses: 152 Q&As

Code d'Examen: MB7-517

Nom d'Examen: Microsoft (NAV 5.0 Installation and Configuration)

Questions et réponses: 92 Q&As

Code d'Examen: 70-563

Nom d'Examen: Microsoft (Designing and Developing Windows Applications Using the Microsoft .NET Framework 3.5)

Questions et réponses: 135 Q&As

Code d'Examen: MB7-515

Nom d'Examen: Microsoft (NAV 5.0 Financials)

Questions et réponses: 210 Q&As

Code d'Examen: 70-622

Nom d'Examen: Microsoft (Pro:Microsoft Desktop Support - Enterprise.)

Questions et réponses: 215 Q&As

Pass4Test est un bon site d'offrir la facilité aux candidats de test Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622. Selon les anciens test, l'outil de formation Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622 est bien proche de test réel.

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft MB4-198 MB7-517 70-563 MB7-515 70-622, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

70-563 Démo gratuit à télécharger: http://www.pass4test.fr/70-563.html

NO.1 Rate your level of proficiency in designing security implementation, including designing data
transmission and storage, authentication and authorization, and role-based security.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

certification Microsoft   70-563 examen   70-563 examen   70-563   70-563 examen   certification 70-563

NO.2 You maintain a Windows Forms application and an ASP.NET application.
The Windows Forms application has the following features:
The application impersonates the logged-on user.
The data is stored in a Microsoft SQL Server 2008 database.
The application grants user access to data by calling the IPrincipal.IsInRole method on the basis of user
roles.
The ASP.NET application uses forms-based authentication to authenticate users.
You need to share the login and user role information between the Windows Forms application and the
ASP.NET application.
What should you do?
A. Modify the Windows Forms application to use client application services instead of impersonation.
B. Add a WebBrowser control to the Windows Forms application to display the ASP.NET login page.
C. Enable integrated security between the Windows Forms application and the Microsoft SQL Server
2008 database.
D. Enable SQL Server authentication between the Windows Forms application and the Microsoft SQL
Server 2008 database.
Answer: A

certification Microsoft   certification 70-563   70-563

NO.3 You create a Windows application by using the .NET Framework 3.5.
The application is used for stock trading purposes. The application has the following features:
The application is deployed to workstations that contain four monitors.
Only one instance of the application can be run at a time.
The application has a multiple-document interface (MDI).
A third-party control is used on the Windows form to display real-time data by using graphs.
The stack of monitors on each workstation is two monitors high and two monitors wide.
When multiple stock quotes are viewed at the same time, the Windows form has to be extended to
another monitor.
The information has to be viewed across the monitors together.
You need to modify the application to meet the following requirements:
Users can compare two or more stock quotes at the same time.
The Windows form can be maximized and restored to the monitor selected by the user.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add a Tab control to the Windows form and display one stock quote for each tab.
B. Add a Table control to the Windows form and display one stock quote for each column.
C. Convert the application to a single-document interface (SDI).
D. Allow multiple instances of the application to be run at the same time.
E. Write a code segment in the Load event of the Windows form. Set the Height property to twice the
height of the screen, and set the Width property to twice the width of the screen.
Answer: DE

Microsoft examen   70-563 examen   70-563 examen

NO.4 You create a Windows application by using the .NET Framework 3.5.
You create a Windows user control in the application.
The application contains the following code segment. (Line numbers are included for reference only.)
01 public struct FullName
02 {
03 public string FirstName { get; set; }
04 public string LastName { get; set; }
05 }
The user control has a property named UserName of the FullName type. You add the user control to a
Windows form.
During the design phase, the UserName property must be allowed to update the FirstName and
LastName properties as comma-delimited values in the property window.
You need to ensure that the properties in the FullName structure are represented as string values.
What should you do?
A. Create a TypeConverter class for the FullName structure.
B. Override the ToString method for the FullName structure.
C. Implement the IFormattable interface for the FullName structure.
D. Implement the IConvertible interface for the FullName structure.
Answer: A

Microsoft examen   certification 70-563   70-563

NO.5 You are creating a Windows application by using the .NET Framework 3.5.
The application is deployed by using the XCopy command. Updates to the application are made available
through a Web site.
The number of users of the application increases.
You need to ensure that all users use the same version of the application.
What should you do?
A. Change the application to use the ClickOnce deployment method.
B. Run the application from a universal naming convention (UNC) path.
C. Create a Microsoft Windows Installer (MSI) package for the application.
D. Write a bootstrap code that ascertains the availability of a new version of the application.
Answer: A

Microsoft   70-563   70-563   certification 70-563   70-563

NO.6 You create a Windows application by using the .NET Framework 3.5.
You review the design for a Windows application that has the following features:
The data layer sends and receives data updates by using Microsoft Messaging Queue (MSMQ) 4.0.
Data is stored in a Microsoft SQL Server 2008 server database instance.
Data from a DataSet object is displayed in a DataGrid control.
The application is deployed to portable computers that can access the corporate network only when
plugged on to it. The data must be most securely stored when the computer is in offline mode.
You need to ensure that the portable computers can update data even when offline.
What should you do?
A. Change the data layer to use a local XML file instead of MSMQ.
B. Change the data layer to use a local data cache along with Microsoft Sync Services instead of MSMQ.
C. Create an ASP.NET Web service to receive data updates from the portable computers.
D. Create a Windows Communication Foundation (WCF) service to send and receive data updates from
the portable computers.
Answer: B

Microsoft examen   70-563   70-563

NO.7 How many years of experience do you have in developing Windows-based applications by using
Windows Forms technologies in .NET Framework 3.5?
A. I have not done this yet.
B. Less than 6 months
C. 6 months 1 year
D. 1 2 years
E. 2 3 years
F. More than 3 years
Answer: A

Microsoft   70-563 examen   70-563

NO.8 You are creating a Windows application by using the .NET Framework 3.5.
The application will access an external Windows Communication Foundation (WCF) service by using the
following contract.
[ServiceContract(SessionMode=SessionMode.NotAllowed)]
public interface IOrderService
{
}
The service contract has multiple operations. The operations will be called by the Windows application
when required.
For a single invocation of the application, you plan to maintain the information of the application state
between subsequent method calls to the WCF service. The application state information cannot be
persisted once the application closes.
You need to ensure that the application can consume the WCF service.
What should you do?
A. Save the information of the application state in the Windows application.
B. Save the information of the application state in a Microsoft SQL Server 2008 database.
C. Save the information of the application state in the HttpContext.Current.Session property.
D. Use the binding and transport elements to support sessions for the WCF service in the Windows
application.
Answer: A

certification Microsoft   70-563 examen   certification 70-563   70-563

NO.9 You create a Windows application by using the .NET Framework 3.5.
The application uses a Microsoft SQL Server 2008 database.
You discover that the application is non-responsive and performs slowly at certain times during the day.
Twenty-five additional users are added to the application to meet a deadline.
You need to ensure that all users experience a consistent level of high application performance
throughout the day. You want to achieve this goal by using minimum development effort.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Use the CommandBehavior.CloseConnection option and the DataReader objects.
B. Perform a stress test on all the components. Change all the components to inherit from the
System.EnterpriseServices.ServicedComponent class.
C. Create a Test Harness application to test the serialization of DataSet objects. Serialize multiple
versions of the DataSet objects whenever possible.
D. Use the SQL Server Profiler tool to identify functions that call stored procedures in the database. Divide
these functions into multiple queries.
E. Create a Test Harness application to test the performance of remoting proxies. Change the remoting
proxies to use the TcpChannel class instead of the HttpChannel class.
Answer: AE

Microsoft examen   certification 70-563   certification 70-563   70-563 examen   70-563

NO.10 Rate your level of proficiency in planning application deployment and maintenance, including planning
for multiple component application development and planning performance monitoring and exception
management strategies.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

Microsoft   certification 70-563   70-563   70-563 examen

NO.11 You create a Windows application by using the .NET Framework 3.5.
You plan to evaluate an application design that contains the following specifications:
Common dialog controls are used to browse through files and folders.
Files are saved by using the StreamWriter object.
When the Save button is clicked, a MessageBox control displays a message.
The message warns the user about the requirement for elevated rights.
You need to ensure that the application meets the following requirements:
It works compatibly on Microsoft Windows XP and Windows Vista operating systems.
It follows Windows Vista User Experience guidelines.
It is able to save a physical file outside the application folder when the Save button is clicked.
What change in design should you recommend?
A. Use the isolated storage mechanism to store the file.
B. Enable the user to execute the application as an administrator.
C. Display the SystemIcons.Shield icon next to the Save button and remove the MessageBox control.
D. Write a Windows service that exposes a remoting object to save the file, and then run the service
under the LocalSystem account.
Answer: C

Microsoft   certification 70-563   certification 70-563   70-563 examen   70-563   70-563 examen

NO.12 You are creating a Windows application by using the .NET Framework 3.5.
The application accesses an external Windows Communication Foundation (WCF) service by using the
following contract.
<ServiceContractAttribute(SessionMode:=SessionMode.NotAllowed)> _
Public Interface IOrderService
End Interface
The service contract has multiple operations. The operations will be called by the Windows application
when required.
For a single invocation of the application, you plan to maintain the information of the application state
between subsequent method calls to the WCF service. The application state information cannot be
persisted once the application closes.
You need to ensure that the application can consume the WCF service.
What should you do?
A. Save the information of the application state in the Windows application.
B. Save the information of the application state in a Microsoft SQL Server 2008 database.
C. Save the information of the application state in the HttpContext.Current.Session property.
D. Use the binding and transport elements to support sessions for the WCF service in the Windows
application.
Answer: A

Microsoft   70-563 examen   70-563 examen

NO.13 You have developed a console application by using the Microsoft .NET Framework 1.1. The console
application uses a set of assemblies for the business logic and the data layer.
You plan to convert the console application to a Windows Forms application.
You need to design a conversion strategy by using minimum amount of time and development effort.
What should you do?
A. Convert the console application and all the data layer assemblies to the .NET Framework 3.5.
B. Convert the console application to the .NET Framework 3.5 by using the conversion wizard of Microsoft
Visual Studio .NET 2008.
C. Upgrade the business logic and the data layer assemblies to the .NET Framework 3.5. Convert the
console application to Windows Forms.
D. Retain the business logic and the data layer assemblies as the .NET Framework 1.1 assemblies.
Convert the console application to Windows Forms.
Answer: D

Microsoft   70-563   70-563   certification 70-563   certification 70-563

NO.14 You are creating a Windows application by using the .NET Framework 3.5.
You plan to evaluate the design strategy of the application.
The design strategy contains the following elements:
The application uses the ClickOnce deployment.
The application runs on computers that have the Microsoft Windows 98 operating system, a 256-MB RAM,
and a 1-GB disk space.
The application transmits the collected data to a server by using a Windows Communication Foundation
(WCF) service.
The application must meet the following requirements:
It displays real-time data.
It gathers data from a serial interface.
The code written for it is small and can be easily deployed.
You discover that the design strategy does not function properly.
You need to ensure that the design strategy functions appropriately.
What should you recommend?
A. Transmit data directly to the database server.
B. Change the application to a console application.
C. Upgrade the operating system to Microsoft Windows XP.
D. Create a Microsoft Windows Installer .MSI installation package for the application.
Answer: C

Microsoft examen   certification 70-563   70-563 examen   70-563 examen

NO.15 You create a Windows application by using the .NET Framework 3.5.
The application is used for data entry purposes. The application has the following features:
Data is read from a shared Microsoft SQL Server 2008 database instance.
Data entered and saved by the users is temporarily stored in a local SQL Server 2008 Compact edition
database instance.
When the users log off from the application, new records from the local database instance are
synchronized to the shared database.
You discover that the performance of the application is affected when multiple users log off from the
application at the same time.
You need to design a performance improvement strategy for the application by using minimum amount of
cost, time, and development effort.
What should you do?
A. Upgrade the local database to Microsoft SQL Server 2008 Express edition.
B. Modify the application to synchronize data into the shared database as soon as the users save their
work.
C. Write a Web service that synchronizes data to the shared database. Call the service when the users
log off from the application.
D. Store the data entered by the users temporarily in an XML file. Merge the new records from the local
XML file to the shared database when the users log off from the application.
Answer: B

certification Microsoft   70-563 examen   70-563 examen   70-563 examen

NO.16 Rate your level of proficiency in designing the application architecture, including designing n-layer
architecture, planning a component reuse strategy, and planning multithreaded implementation and user
interface responsiveness.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

Microsoft examen   certification 70-563   certification 70-563   70-563

NO.17 You create a Windows application by using the .NET Framework 3.5.
You create a Windows user control in the application.
The application contains the following code segment. (Line numbers are included for reference only.)
01 Public Structure FullName
02 Public FirstName As String
03 Public LastName As String
04 End Structure
The user control has a property named UserName of the FullName type. You add the user control to a
Windows form.
During the design phase, the UserName property must be allowed to update the FirstName and
LastName properties as comma-delimited values in the property window.
You need to ensure that the properties in the FullName structure are represented as string values.
What should you do?
A. Create a TypeConverter class for the FullName structure.
B. Override the ToString method for the FullName structure.
C. Implement the IFormattable interface for the FullName structure.
D. Implement the IConvertible interface for the FullName structure.
Answer: A

certification Microsoft   70-563   70-563 examen

NO.18 Rate your level of proficiency in validating an application design against specifications, including
analyzing the technical feasibility of application design, validating proof of concept, evaluating a design
against available resources, and evaluating test requirements.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

Microsoft   70-563 examen   70-563 examen   70-563

NO.19 Rate your level of proficiency in planning user interaction and presentation, including planning data
capture, designing user interface components, and designing a data binding strategy.
A. I am considered an expert on this. I have successfully done this multiple times without assistance or
error. I train or supervise others on this activity. Others come to me when they have questions or need
assistance with this.
B. I have successfully done this without assistance and with few errors, but I do not train or supervise
others on this activity.
C. I am proficient at this. I have successfully done this on my own, but I occasionally require assistance
for some types of problems encountered when doing this and/or occasionally make minor errors.
D. I have successfully done this with the assistance of others or specific instructions.
E. I am a novice. I have not yet done this or am learning.
Answer: A

Microsoft   70-563   70-563   70-563   70-563

NO.20 You plan to create a Windows application by using the .NET Framework 3.5.
The Windows application must use a proprietary protocol to connect to a Windows Communication
Foundation (WCF) service. The application persists data to a Microsoft SQL Server 2008 database by
using the WCF service.
You need to analyze the feasibility of creating the application.
Which proof of concept should you create?
A. A Windows application that connects to a WCF service by using HTTP
B. A Windows application that connects directly to a SQL Server 2008 database
C. A Windows application that connects to a WCF service by using the proprietary protocol
D. A Windows application that connects to a WCF service by using HTTP and persists data to a SQL
Server database
Answer: C

certification Microsoft   70-563   70-563 examen   certification 70-563