Le test Juniper JN0-201 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Juniper JN0-201 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Juniper JN0-201.
Choisir le Pass4Test peut vous aider à réussir 100% le test Juniper JN0-201 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Pass4Test peut offrir nombreux de documentations aux candidats de test Juniper JN0-201, et aider les candidats à réussir le test. Les marétiaux visés au test Juniper JN0-201 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Juniper JN0-201 100%.
Code d'Examen: JN0-201
Nom d'Examen: Juniper (Juniper networks Certified internet associate.m(jncia-m))
Questions et réponses: 120 Q&As
Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Juniper JN0-201 et passer le test à la première fois.
JN0-201 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-201.html
NO.1 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A
Juniper JN0-201 JN0-201 JN0-201 examen
NO.2 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC
Juniper JN0-201 examen certification JN0-201
NO.3 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B
Juniper examen JN0-201 certification JN0-201 JN0-201 JN0-201
NO.4 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A
Juniper certification JN0-201 certification JN0-201 JN0-201 examen JN0-201
NO.5 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A
Juniper JN0-201 JN0-201 JN0-201 examen
NO.6 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B
Juniper certification JN0-201 JN0-201
NO.7 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B
Juniper JN0-201 examen certification JN0-201 JN0-201 JN0-201 certification JN0-201
NO.8 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
certification Juniper certification JN0-201 JN0-201 examen JN0-201 JN0-201 JN0-201
NO.9 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C
certification Juniper JN0-201 JN0-201 examen certification JN0-201
NO.10 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A
Juniper certification JN0-201 certification JN0-201 JN0-201
NO.11 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A
certification Juniper certification JN0-201 JN0-201 certification JN0-201
NO.12 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC
certification Juniper certification JN0-201 JN0-201 examen JN0-201 examen JN0-201
NO.13 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD
Juniper certification JN0-201 JN0-201 certification JN0-201 JN0-201
NO.14 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D
certification Juniper JN0-201 examen certification JN0-201
NO.15 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A
Juniper JN0-201 JN0-201 examen certification JN0-201 JN0-201 examen
NO.16 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B
Juniper examen JN0-201 JN0-201
NO.17 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB
Juniper JN0-201 JN0-201 examen JN0-201 examen certification JN0-201
NO.18 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C
Juniper examen JN0-201 JN0-201 JN0-201 JN0-201 certification JN0-201
NO.19 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper JN0-201 JN0-201 examen JN0-201 JN0-201 examen
NO.20 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD
Juniper JN0-201 JN0-201 examen
Pass4Test vous offre un choix meilleur pour faire votre préparation de test Juniper JN0-201 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Juniper JN0-201 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Juniper JN0-201 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
没有评论:
发表评论